Shanli Customized Low Dew Point Air Cooled Combined Air Dryer for Atlas Ingersoll Rand Compressor

• After-sales Service: Ok
• Warranty: 1 Year
• Flow: Cross Flow
• Material Status: Bulk
• Drying Medium: Air
• Structure: All Kinds
• Model NO.: SDZF-SDZW
• Operation Pressure: 0.6-40MPa
• Inlet Temperature: <80 Degree
• Cooling Way: Air Cooling and Water Cooling
• Type: All Size
• Certification: CE, ISO9001
• Feature: Cold-Resistant, Corrosion-Resistant
• Standard: Standard
• Material: Alloy
• Transport Package: Wooden Case
• Specification: 810*544*1327
• Trademark: SHANLI
• Origin: Hangzhou, China
• HS Code: 8419399090
• Production Capacity: 50000pieces/Year

Product Description

Shanli Customized Low Dew Point  air cooled combined air dryer  for  Atlas Ingersoll Rand compressor  

Air-cooled combined dryer

Detailed Photos

Technological Process of the Combined Low Dew Point Compressed Air Dryer
 

 

Symbol	Name	Symbol	Name
1	Refrigerant Compressor	15	Air Pressure Gauge
2	Oil Separator	16	Heat Exchanger
3	Condenser	17	Pressure Relief Valve
4	Dryer Filter	18,19	Check Valve
5	Sight Lens	20,21	Check Valve(Heat Type)
6	Bulge Thermal Expansion Valve	22,23,24,25	Pneumatic Valve
7	Hot Gas Bypass Valve	26,29,30,33	Diffuser
8	Vaporizer	27,31	Air Pressure Gauge
9	Humidity Sensor	28,32	Adsorption Vessel
10	Evaporator	34,35,36,37	Pilot Solenoid Valve
11	Refrigerant Low Pressure Gauge	38	Muffler
12	Refrigerant Low Pressure Gauge	39	Flow Regulating Valve(Heatless Type)
13	High and Low Pressure Controller	40	Throttling Orifice Plate(Heat Type)
14	Gas Liquid Separator	41	Electical Heater(Heat Type)

,General Introduction: 
Commonly, there are two kinds of compressed air dryer: refrigerated compressed air dryer and regeneration adsorption one. The refrigerated compressed air dryer is quite energy-saving without any air loss, While it is limited by the dew point temperature. The regeneration adsorption compressed air dryer can reach a quiet low dew point, but it has the shortcoming of big air loss and high energy consumption.
The SHANLI combined low dew point compressed air dryer takes the maximum advantages of the above two kinds of dryers through reasonable pipeline connection and capacity matching, which ensure its economic operation and high quality of low dew point finished air.
,Operating Principle:
Firstly, the hot and wet compressed air from the compressor is heat exchange with dried cold compressed air in the heat exchanger. Then it will be cooled down to about 2ºC by evaporator. Under this pressure dew point, the majority of vapor water in the compressed air is eliminated and discharged. After these processes, the low temperature air goes into the heat exchanger to cool the high wet compressed air, at the same time, itself temperature goes up in order to prevent the condensation of dew on the surface of pipelines. Last, low moisture compressed air dryer goes into the adsorption vessel to be further dried  in order to get the good dew point.

Product Parameters

Model        Item	Air capacity (Nm^3/min)	Desiccant weight(kg)	Air connector dia	Refrigerant power (HP)	Air flow (Nm^3/h)	Fan power(W)	Voltage (V)	Dryer Net Weight (kg)	Length(mm)	Wideth(mm)	Height(mm)
SDZF-1	1.2	25	G1"	1/2	745	1×50	220	400	1080	850	1460
SDZF-2	2.5	40	G1"	1/2	745	1×50	220	440	1100	900	2050
SDZF-3	3.6	60	G1"	3/4	1330	1×100	220	460	1200	1000	1808
SDZF-4.5	5	85	G1 1/2"	1	2670	1×135	220	660	1290	1030	2263
SDZF-6	6.8	105	G1 1/2"	1.5	4500	1×230	220	775	1500	1105	1931
SDZF-8	8.5	150	G2"	2	5340	2×135	220	970	1500	1240	2016
SDZF-10	10.9	185	G2"	2.5	5340	2×135	220	1120	1500	1240	2316
SDZF-12	12.8	185	G2"	2.5	5340	2×135	220	1120	1500	1240	2316
SDZF-15	16	310	DN65	3	7600	2×190	380/220	1700	1960	1450	2342
SDZF-20	22	395	DN65	4	7600	2×190	380/220	1800	1980	1600	2408
SDZF-25	26.8	492	DN80	5	9000	2×230	380/220	2100	2270	1700	2460
SDZF-30	32	600	DN80	6	9000	2×230	380/220	2300	2420	1780	2506
SDZF-40	43.5	725	DN100	7	12500	2×420	380/220	2700	2100	2340	2673
SDZF-50	53	855	DN100	10	13500	3×230	380/220	2900	2100	2390	2687
SDZF-60	67	1005	DN125	12	18750	3×420	380/220	3350	2250	2600	2814
SDZF-80	90	1335	DN125	13.3	25000	4×420	380/220	4200	2640	2600	2866

 

 

 

Note:Design conditions: working pressure: 7bar, inlet temperature: 38ºC, pressure dew point: -20ºC

 

Company Profile

 

Certifications

 

Packaging & Shipping

 

FAQ