Sdxg/Sdxy Desiccant Air Dryer Range

• After-sales Service: Ok
• Warranty: 1 Year
• Flow: Cross Flow
• Material Status: Bulk
• Drying Medium: Air
• Structure: All Kinds
• Model NO.: SDXG/SDXY
• Operation Pressure: 0.6-40MPa
• Inlet Temperature: <80 Degree
• Cooling Way: Air Cooling and Water Cooling
• Type: All Size
• Certification: CE, ISO9001
• Feature: Cold-Resistant, Corrosion-Resistant
• Standard: Standard
• Material: Alloy
• Transport Package: Wooden Case
• Specification: 810*544*1327
• Trademark: SHANLI
• Origin: Hangzhou, China
• HS Code: 8419399090
• Production Capacity: 50000pieces/Year

Product Description

SDXG/SDXY desiccant air dryer range

Regeneration Desiccant Air Dryer(PB Series)

Detailed Photos

Process Flow Diagram of Heated Regeneration Air Dryers 
 

A,B	Desiccant Tower
K1,K2,K3,K4	One-way Check Valve
M	Process Controller
O	Electromagnetic Valve Set
a,b,c,d	Pneumatic Valve
P1,P2	Pressure Gauge
JF	Regulator
S	Muffler
Q	Heater
Z1,Z2,Z3,Z4	Diffuser

Working Principle of Heated Regeneration Air dryers :
With taking advantage of the surface absorbability of porous solid material, the heated regeneration air dryer is a kind of equipment, which can absorb the moisture to get satisfied air with lower dew point, air dryer and better cleanliness.
It adopts active alumina, whose diameter is almost same with water molecule, as the adsorbent, it's also in line with the world advanced pressure swing adsorption (PSA) principle, that is to say, when absorbing in normal temperature, the pressure of water molecule in air is big than that in desiccant, so the former will be sucked into the desiccant, then condense to water drop, meanwhile the liberated heat will be stored at the upside of the tower. As regenerating, in order to temporary lower the desiccant absorption ability to let the water molecule effuse out, about 7% dry air will go through the regeneration tower slowly after the air being heated up to 150ºC, the stored heat also will take part in regeneration process for energy saving. For the circular employ of absorption-regeneration-absorption, the desiccant dries compressed air continuously to get deeply dried air. The technical performance already has reached the international high-level standard. It can be you ideal equipment with dew point lowering than -40ºC.
The working alternating cycle of twin tower can ensure stable output of satisfied compressed air. Its pressure dew point which can make up to -40ºC is definitely can obtain deeply dry and oil-free compressed air with high purity to meet the customer high requirements. Due to the heater, it can keep good regeneration performance with less purge air loss.
 

Product Parameters

 

Model	Air capacity (Nm^3/min)	Desiccant weight (kg)	Air connecting diameter	Dryer weight (Kg)	LENGHTH (mm)	WIDETH (mm)	HEIGHT (mm)
SDXW-1PB	1.2	40	G1"	165	810	500	1275
SDXW-2PB	2.5	45	G1"	235	810	500	1325
SDXW-3PB	3.6	60	G1"	355	810	500	1675
SDXW-4.5PB	5.0	100	G1-1/2"	385	1040	600	1793
SDXW-6PB	6.8	120	G1-1/2"	480	1040	600	2143
SDXW-8PB	8.5	180	G2"	600	1200	600	2246
SDXW-10PB	10.9	200	G2"	755	1200	600	2346
SDXW-12PB	12.8	200	G2"	755	1200	600	2346
SDXW-15PB	16	310	DN65	775	1310	769	2329
SDXW-20PB	22	492	DN65	1030	1410	769	2390
SDXW-25PB	26.8	578	DN80	1200	1510	818	2774
SDXW-30PB	32	600	DN80	1220	1565	815	2501
SDXW-40PB	43.5	856	DN100	1640	1854	963	2687
SDXW-50PB	53	1002	DN100	1650	1900	978	2707
SDXW-60PB	67	1334	DN125	2390	2166	1100	2869
SDXW-80PB	90	1608	DN125	2900	2864	1059	2857
SDXW-100PB	110	2000	DN150	3800	3460	1230	3048
SDXW-120PB	130	2435	DN150	4330	3560	1305	3094
SDXW-150PB	160	2926	DN200	5270	3960	1450	3332
SDXW-200PB	210	4070	DN200	6920	4360	1605	3471

Note:Design conditions: working pressure: 7bar, inlet temperature: 38ºC, pressure dew point: -20ºC

 
Zero air consumption compression heat regeneration adsorption dryer PB series



(1) , Product Introduction
The most significant advantages for the heat of compression regeneration adsorption dryer is that it makes full use of the high-temperature exhaust heat from the air compressor which make heating regeneration for desiccant.It cancels the electric heater of the heated regeneration adsorption dryer which saving the electric power consumption with a power consumption of only 0.5kW per hour.
(2) , Working Principle 
The high-temperature and unsaturated wet air discharged from the compressor and then enter into the dryer directly. Firstly, the air flow into a tower for heating regeneration, then the air after the regeneration flow into the after cooler for cooling and then the water be separated by the gas-liquid separator. And finally flow into another tower for dry adsorption which dry air be produced. After heating and regeneration, the high-temperature desaturated wet air discharged from the air compressor is firstly cooled by the bypass water cooler and separated by the bypass gas water separator, then enters the previously heated adsorption tower for cold blowing of adsorbent, and then enters the rear cooler for cooling and gas-water separator to separate the liquid water, and then enters another adsorption tower for adsorption, and is discharged into the use pipe through the outlet of the dryer Net. As this equipment is a derivative of the compression heat regeneration series, it has all the energy-saving effects of compression heat, and more importantly, it completely eliminates the gas consumption and greatly reduces the comprehensive energy consumption. It is fully in line with China's national policy of "energy saving and emission reduction" effect of the adsorption dryer. Our company has vigorously pushed this product to the market and has been widely praised by users.


(3), Specification

Model   Item	Air capacity (Nm^3/min)	Length (mm)	Wideth (mm)	Height (mm)	Dryer net weight (kg)	Desiccant dryer (kg)	Air connector dia	Power consumption (w)	Cooling water circulation (Nm3/h)
SDXY-30PB-I	30	3100	1900	2650	3400	850	DN80	500	30
SDXY-40PB-I	40	3400	2000	2700	4150	990	DN100	500	40
SDXY -50PB-I	50	3400	2000	2790	4400	1300	DN100	500	50
SDXY -60PB-I	60	3600	2300	2922	5200	1670	DN125	500	60
SDXY -80PB-I	80	4000	2400	2985	6300	2050	DN125	500	80
SDXY-100PB-I	100	4300	2800	3037	7200	2540	DN150	500	106
SDXY -120PB-I	120	4600	2800	3154	8800	3600	DN150	500	94
SDXY -150PB-I	150	5200	3350	3407	12000	4900	DN200	500	118
SDXY -180PB-I	180	5400	3350	3463	13200	5600	DN200	500	142
SDXY -200PB-I	200	5500	3400	3535	15600	6400	DN200	500	156
SDXY -220PB-I	220	5700	3400	3575	16600	7150	DN200	500	172

 
Note: Working pressure 7bar, inlet temperature: 38ºC, pressure dew point -20ºC

Company Profile

 

Certifications

 

Packaging & Shipping

 

FAQ