Alloy All Kinds Compression Heat Regeneration Adsorption Dryer

• Customization: Available
• After-sales Service: Ok
• Warranty: 1 Year
• Flow: Cross Flow
• Material Status: Bulk
• Drying Medium: Air
• Structure: All Kinds
• Operation Pressure: 0.6-40MPa
• Inlet Temperature: <80 Degree
• Cooling Way: Air Cooling and Water Cooling
• Type: All Size
• Certification: CE, ISO9001
• Feature: Cold-Resistant, Corrosion-Resistant
• Standard: Standard
• Material: Alloy
• Transport Package: Wooden Case
• Specification: 810*544*1327
• Trademark: SHANLI
• Origin: Hangzhou, China
• HS Code: 8419399090
• Production Capacity: 50000pieces/Year

Product Description

Zero Air Consumption Compression Heat Regeneration Adsorption Dryer (PB Series)

Detailed Photos

The most significant advantages for the heat of compression regeneration adsorption dryer is that it makes full use of the high-temperature exhaust heat from the air compressor which make heating regeneration for desiccant.It cancels the electric heater of the heated regeneration adsorption dryer which saving the electric power consumption with a power consumption of only 0.5kW per hour.


Working Principle :
The high-temperature and unsaturated wet air discharged from the compressor and then enter into the dryer directly. Firstly, the air flow into a tower for heating regeneration, then the air after the regeneration flow into the after cooler for cooling and then the water be separated by the gas-liquid separator. And finally flow into another tower for dry adsorption which dry air be produced. After heating and regeneration, the high-temperature desaturated wet air discharged from the air compressor is firstly cooled by the bypass water cooler and separated by the bypass gas water separator, then enters the previously heated adsorption tower for cold blowing of adsorbent, and then enters the rear cooler for cooling and gas-water separator to separate the liquid water, and then enters another adsorption tower for adsorption, and is discharged into the use pipe through the outlet of the dryer Net. As this equipment is a derivative of the compression heat regeneration series, it has all the energy-saving effects of compression heat, and more importantly, it completely eliminates the gas consumption and greatly reduces the comprehensive energy consumption. It is fully in line with China's national policy of "energy saving and emission reduction" effect of the adsorption dryer. Our company has vigorously pushed this product to the market and has been widely praised by users.
 

Product Parameters

Model	Air capacity (Nm^3/min)	Length (mm)	Wideth (mm)	Height (mm)	Dryer net weight (kg)	Desiccant dryer (kg)	Air connector dia	Power consumption (w)	Cooling water circulation (Nm3/h)
SDXY-30PB-I	30	3100	1900	2650	3400	850	DN80	500	30
SDXY-40PB-I	40	3400	2000	2700	4150	990	DN100	500	40
SDXY -50PB-I	50	3400	2000	2790	4400	1300	DN100	500	50
SDXY -60PB-I	60	3600	2300	2922	5200	1670	DN125	500	60
SDXY -80PB-I	80	4000	2400	2985	6300	2050	DN125	500	80
SDXY-100PB-I	100	4300	2800	3037	7200	2540	DN150	500	106
SDXY -120PB-I	120	4600	2800	3154	8800	3600	DN150	500	94
SDXY -150PB-I	150	5200	3350	3407	12000	4900	DN200	500	118
SDXY -180PB-I	180	5400	3350	3463	13200	5600	DN200	500	142
SDXY -200PB-I	200	5500	3400	3535	15600	6400	DN200	500	156
SDXY -220PB-I	220	5700	3400	3575	16600	7150	DN200	500	172

Note:Design conditions: working pressure: 7bar, inlet temperature: 38ºC, pressure dew point: -20ºC

Company Profile

 

Certifications

 

FAQ