All Kinds Cooling and Water Compressed Adsorption Desiccant Air Dryer

Product Details
Customization: Available
After-sales Service: Ok
Warranty: 1 Year
Still deciding? Get samples of US$ 1000/Piece
Request Sample
Manufacturer/Factory & Trading Company

360° Virtual Tour

Diamond Member Since 2022

Suppliers with verified business licenses

Audited Supplier

Audited by an independent third-party inspection agency

Year of Establishment
1997-03-12
Management System Certification
ISO9001:2015, ISO14001:2015, ISO45001:2018
  • All Kinds Cooling and Water Compressed Adsorption Desiccant Air Dryer
  • All Kinds Cooling and Water Compressed Adsorption Desiccant Air Dryer
  • All Kinds Cooling and Water Compressed Adsorption Desiccant Air Dryer
  • All Kinds Cooling and Water Compressed Adsorption Desiccant Air Dryer
Find Similar Products
  • Overview
  • Detailed Photos
  • Product Parameters
  • Company Profile
  • Certifications
  • Packaging & Shipping
  • FAQ
Overview

Basic Info.

Material Status
Bulk
Drying Medium
Air
Structure
All Kinds
Operation Pressure
0.6-40MPa
Inlet Temperature
<80 Degree
Cooling Way
Air Cooling and Water Cooling
Type
All Size
Certification
CE, ISO9001
Feature
Cold-Resistant, Corrosion-Resistant
Standard
Standard
Material
Alloy
Transport Package
Wooden Case
Specification
810*544*1327
Trademark
SHANLI
Origin
Hangzhou, China
HS Code
8419399090
Production Capacity
50000pieces/Year

Product Description

Zero Air Consumption Blower Heat Regeneration Adsorption Compressed Air Dryer (PB Series)
Detailed Photos


All Kinds Cooling and Water Compressed Adsorption Desiccant Air Dryer
Process 
Flow Diagram of Heated
Desiccant Air dryers

All Kinds Cooling and Water Compressed Adsorption Desiccant Air Dryer
Working Principle :
The wet compressed air is from the butterfly valve 1 to the bottom of the tower A from the air inlet,Through the diffuser,The compressed air enters smoothly into the tower A,flowing through the dry bed,Moisture is absorbed,Make pressure dew point reduced to 40 ºC,Dry compressed air flows from the top of the tower A,through the check butterfly valve C1 to enter the point of use of compressed air.While adsorbing the Tower A, the Tower B regenerates the adsorbent.At this point, the moisture content of the adsorbent in tower B is saturated,drain pressure in the tower to one atmosphere by dropping valve 4,5 and muffler OS.After reducing pressure,Air Blower BL starting,entering into the atmosphere,Heating up through the heater EH,The adsorbent in the tower B is regenerating, the air is heated between 120 ºC to 180 ºC.Hot air enter into Tower B,When flowing through the absorbent bed, the water is released from the surface of the adsorbent, and into the air, the heated regeneration air are released into the atmosphere by the butterfly valve 4,5 and muffler OS.After the heating stage, The adsorbent is regenerated, but adsorbent temperature is still high, before adsorbing the compressed air, must be to reduce the temperature, in order to obtain the optimal adsorption effect.The equipment is cooled by a water-cooled HT after cooler rather than a dry finished product, thus saving energy.In the process, through a series of Matching Application of the valve, the Blower and the tower B form a closed loop, avoid heaters, flowing through the after cooling, the blower cooling down the air into the tower B, the cooling air through the adsorption takes the heat away. And then enter the standby and voltage-sharing of Tower A , then the two towers at the same time adsorption for some time, the last two towers automatically switch to the next cycle.
 

 

Product Parameters

 

 


Model
  
Air capacity
(Mm3/min)
Air connector dia Heater power(KW) Blower power(KW) Desiccant weight (kg) Dryer net weight
(kg)
Dryer size
(mm)
Cooling water circulation M³/h
SDXG-15PB-I 16 DN65 10 2.2 486 1100 1600×1480×2419 1.2
SDXG-20PB-I   22 DN65 12 5.5 606 1500 1650×1604×2442 1.2
SDXG-25PB-I 26.8 DN80 15 5.5 716 2000 1800×1757×2564 1.6
SDXG-30PB-I 32 DN80 18 5.5 860 2200 1800×1781×2544 2.2
SDXG-40PB-I 43.5 DN100 22 7.5 1158 2300 2060×1862×2657 3.3
SDXG-50PB-I 53 DN100 27 9 1422 3000 2170×2009×2726 3.3
SDXG-60PB-I 67 DN125 36 9 1608 4200 2546×2199×2831 5.5
SDXG-80PB-I 90 DN125 42 9 2436 5400 2600×2317×2940 5.5
SDXG-100PB-I 110 DN150 54 13 2926 6100 3250×2432×3087 9
SDXG-120PB-I 130 DN150 72 13 3476 8100 3350×2512×3153 9
SDXG-150PB-I 160 DN200 84 13 4710 11600 3800×2742×3428 9
SDXG-200PB-I 210 DN200 96 18.5 7008 16000 4700×2578×3532 16
Note:Design conditions: working pressure: 7bar, inlet temperature: 38ºC, pressure dew point: -20ºC
All Kinds Cooling and Water Compressed Adsorption Desiccant Air DryerAll Kinds Cooling and Water Compressed Adsorption Desiccant Air Dryer
Company Profile

 

All Kinds Cooling and Water Compressed Adsorption Desiccant Air Dryer
Certifications

 

All Kinds Cooling and Water Compressed Adsorption Desiccant Air DryerAll Kinds Cooling and Water Compressed Adsorption Desiccant Air Dryer
All Kinds Cooling and Water Compressed Adsorption Desiccant Air Dryer
Packaging & Shipping

 

All Kinds Cooling and Water Compressed Adsorption Desiccant Air Dryer
FAQ

 

All Kinds Cooling and Water Compressed Adsorption Desiccant Air Dryer

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now
Contact Supplier